Design and testing of a high-precision generating voltmeter for metal-enclosed megavolt level DC voltage source.

An extremely stable megavolt (MV) level DC voltage source is the key foundation for many scientific instruments, and the need for accurate measurement and long-term real-time monitoring of its output voltage is increasingly urgent. The utilization of conventional resistive voltage dividers for measurements introduces leakage currents, resulting in considerable measurement errors. The non-contact generating voltmeter (GVM) sensor based on electric field measurement has a simple structure and a low cost, making it expected to be an effective solution. Currently, most research on GVM sensors focuses on the measurement of weak electric fields at kV/m levels with significant interference. In this paper, an improved high-precision non-contact GVM sensor was designed. A DC voltage test platform was built, and the effects of the sampling resistor and motor rotation speed on the measurement results were discussed. The relative combined uncertainty of the improved GVM sensor reached 0.042%, which satisfied the urgent need for MV level DC voltage source measurement. The improved GVM sensor can provide an effective reference for measuring the output voltage of a metal-enclosed MV level DC voltage source or the potential of a suspended electrode.

High-uniformity and high-performance waveguide Ge photodetectors for the O and C bands.

This paper presents the test results for high-performance and high-uniformity waveguide silicon-based germanium (Ge) photodetectors (PDs) for the O band and C band. Both wafer-scale and chip-scale test results are provided. The fabricated lateral p-i-n (LPIN) PDs exhibit a responsivity of 0.97 A/W at a bias of -2V, a bandwidth of 60 GHz, and a no-return-to-zero (NRZ) eye diagram rate of 53.125 Gb/s. Additionally, an average dark current of 22.4 nA was obtained in the vertical p-i-n (VPIN) PDs at -2V by optimizing the doping process. The device can reach an average responsivity of 0.9 A/W in the O band. The standard deviation in a wafer with a dark current and responsivity is as low as 7.77 nA and 0.03 A/W at -2V, respectively.

Rapid hydrolysis of NO2 at High Ionic Strengths of Deliquesced Aerosol Particles.

Nitrogen dioxide (NO2) hydrolysis in deliquesced aerosol particles forms nitrous acid and nitrate and thus impacts air quality, climate, and the nitrogen cycle. Traditionally, it is considered to proceed far too slowly in the atmosphere. However, the significance of this process is highly uncertain because kinetic studies have only been made in dilute aqueous solutions but not under high ionic strength conditions of the aerosol particles. Here, we use laboratory experiments, air quality models, and field measurements to examine the effect of the ionic strength on the reaction kinetics of NO2 hydrolysis. We find that high ionic strengths (I) enhance the reaction rate constants (kI) by more than an order of magnitude compared to that at infinite dilution (kI=0), yielding log10(kI/kI=0) = 0.04I or rate enhancement factor = 100.04I. A state-of-the-art air quality model shows that the enhanced NO2 hydrolysis reduces the negative bias in the simulated concentrations of nitrous acid by 28% on average when compared to field observations over the North China Plain. Rapid NO2 hydrolysis also enhances the levels of nitrous acid in other polluted regions such as North India and further promotes atmospheric oxidation capacity. This study highlights the need to evaluate various reaction kinetics of atmospheric aerosols with high ionic strengths.

Nacre-Mimetic Structure Multifunctional Ion-Conductive Hydrogel Strain Sensors with Ultrastretchability, High Sensitivity, and Excellent Adhesive Properties.

Recently, conductive hydrogels have emerged as promising materials for smart, wearable devices. However, limited mechanical properties and low sensitivity greatly restrict their lifespan. Based on the design of biomimetic-layered structure, the conductive hydrogels with nacre-mimetic structure were prepared by using layered acrylic bentonite (AABT) and phytic acid (PA) as multifunctional "brick" and "mortar" units. Among them, the unique rigid cyclic multihydroxyl structure of the "organic mortar" PA preserves both ultrastretchability (4050.02%) and high stress (563.20 kPa) of the hydrogel, which far exceeds most of the reported articles. Because of the synergistic effect of AABT and PA, the hydrogel exhibits an excellent adhesive strength (87.74 kPa). The role of AABT in the adhesive properties of hydrogels is proposed for the first time, and a general strategy for improving the adhesive properties of hydrogels by using AABT is demonstrated. Furthermore, AABT provides ion channels and PA ionizes abundant H+, conferring a high gauge factor (GF = 14.95) and excellent antimicrobial properties to the hydrogel. Also, inspired by fruit batteries, simple self-powered flexible sensors were developed. Consequently, this study provides knowledge for functional bentonite filler modified hydrogel, and the prepared multifunctional ionic conductive hydrogel shows great application potential in the field of intelligent wearable devices.

Beam Steering Technology of Optical Phased Array Based on Silicon Photonic Integrated Chip.

Light detection and ranging (LiDAR) is widely used in scenarios such as autonomous driving, imaging, remote sensing surveying, and space communication due to its advantages of high ranging accuracy and large scanning angle. Optical phased array (OPA) has been studied as an important solution for achieving all-solid-state scanning. In this work, the recent research progress in improving the beam steering performance of the OPA based on silicon photonic integrated chips was reviewed. An optimization scheme for aperiodic OPA is proposed.

Anthropogenic short-lived halogens increase human exposure to mercury contamination due to enhanced mercury oxidation over continents.

Mercury (Hg) is a contaminant of global concern, and an accurate understanding of its atmospheric fate is needed to assess its risks to humans and ecosystem health. Atmospheric oxidation of Hg is key to the deposition of this toxic metal to the Earth's surface. Short-lived halogens (SLHs) can provide halogen radicals to directly oxidize Hg and perturb the budget of other Hg oxidants (e.g., OH and O3). In addition to known ocean emissions of halogens, recent observational evidence has revealed abundant anthropogenic emissions of SLHs over continental areas. However, the impacts of anthropogenic SLHs emissions on the atmospheric fate of Hg and human exposure to Hg contamination remain unknown. Here, we show that the inclusion of anthropogenic SLHs substantially increased local Hg oxidation and, consequently, deposition in/near Hg continental source regions by up to 20%, thereby decreasing Hg export from source regions to clean environments. Our modeling results indicated that the inclusion of anthropogenic SLHs can lead to higher Hg exposure in/near Hg source regions than estimated in previous assessments, e.g., with increases of 8.7% and 7.5% in China and India, respectively, consequently leading to higher Hg-related human health risks. These results highlight the urgent need for policymakers to reduce local Hg and SLHs emissions. We conclude that the substantial impacts of anthropogenic SLHs emissions should be included in model assessments of the Hg budget and associated health risks at local and global scales.

A probe into the acid deposition mitigation path in China over the last four decades and beyond.

China currently has the highest acid deposition globally, yet research on its status, impacts, causes and controls is lacking. Here, we compiled data and calculated critical loads regarding acid deposition. The results showed that the abatement measures in China have achieved a sharp decline in the emissions of acidifying pollutants and a continuous recovery of precipitation pH, despite the drastic growth in the economy and energy consumption. However, the risk of ecological acidification and eutrophication showed no significant decrease. With similar emission reductions, the decline in areas at risk of acidification in China (7.0%) lags behind those in Europe (20%) or the USA (15%). This was because, unlike Europe and the USA, China's abatement strategies primarily target air quality improvement rather than mitigating ecological impacts. Given that the area with the risk of eutrophication induced by nitrogen deposition remained at 13% of the country even under the scenario of achieving the dual targets of air quality and carbon dioxide mitigation in 2035, we explored an enhanced ammonia abatement pathway. With a further 27% reduction in ammonia by 2035, China could largely eliminate the impacts of acid deposition. This research serves as a valuable reference for China's future acid deposition control and for other nations facing similar challenges.

Weak transport of atmospheric water-insoluble particulate carbon from South Asia to the inner Tibetan Plateau in the monsoon season.

Carbonaceous particles play a crucial role in atmospheric radiative forcing. However, our understanding of the behavior and sources of carbonaceous particles in remote regions remains limited. The Tibetan Plateau (TP) is a typical remote region that receives long-range transport of carbonaceous particles from severely polluted areas such as South Asia. Based on carbon isotopic compositions (Δ14C/δ13C) of water-insoluble particulate carbon (IPC) in total suspended particle (TSP), PM2.5, and precipitation samples collected during 2020-22 at the Nam Co Station, a remote site in the inner TP, the following results were achieved: First, fossil fuel contributions (ffossil) to IPC in TSP samples (28.60 ± 9.52 %) were higher than that of precipitation samples (23.11 ± 8.60 %), and it is estimated that the scavenging ratio of IPC from non-fossil fuel sources was around 2 times that from fossil fuel combustion during the monsoon season. The ffossil of IPC in both TSP and PM2.5 samples peaked during the monsoon season. Because heavy precipitation during the monsoon season scavenges large amounts of long-range transported carbonaceous particles, the contribution of local emissions from the TP largely outweighs that from South Asia during this season. The results of the IPC source apportionment based on Δ14C and δ13C in PM2.5 samples showed that the highest contribution of liquid fossil fuel combustion also occurred in the monsoon season, reflecting increased human activities (e.g., tourism) on the TP during this period. The results of this study highlight the longer lifetime of fossil fuel-sourced IPC in the atmosphere than that of non-fossil fuel sources in the inner TP and the importance of local emissions from the TP during the monsoon season. The findings provide new knowledge for model improvement and mitigation of carbonaceous particles.

North Korean CO emissions reconstruction using DMZ ground observations, TROPOMI space-borne data, and the CMAQ air quality model.

Emission uncertainty in North Korea can act as an obstacle when developing air pollution management plans in the country and neighboring countries when the transboundary transport of air pollutants is considered. This study introduces a novel approach for adjusting and reallocating North Korean CO emissions, aiming to complement the limited observational and emissions data on the country's air pollutants. We utilized ground observations from demilitarized zone (DMZ) and vertical column density (VCD) data from a TROPOspheric Monitoring Instrument (TROPOMI), which were combined with the Community Multi-Scale Air Quality (CMAQ) chemistry transport model simulations. The Clean Air Support System (CAPSS) and Satellite Integrated Joint Monitoring of Air Quality (SIJAQ) emissions inventories served as the basis for our initial simulations. A two-step procedure was proposed to adjust both the emission intensity and the spatial distribution of emissions. First, air quality simulations were conducted to explore model sensitivity to changes in North Korean CO emissions with respect to ground concentrations. DMZ observations then constrained these simulations to estimate corresponding emission intensity. Second, the spatial structure of North Korean CO emission sources was reconstructed with the help of TROPOMI CO VCD distributions. Our two-step hybrid method outperformed individual emissions adjustment and spatial reallocation based solely on surface or satellite observations. Validation using ground observations from the Chinese Dandong site near the China-North Korea border revealed significantly improved model simulations when applying the updated CO emissions. The adjusted CO emissions were 10.9 times higher than those derived from the bottom-up emissions used in this study, highlighting the lack of information on North Korean pollutants and emission sources. This approach offers an efficient and practical solution for identifying potential missing emission sources when there is limited on-site information about air quality on emissions.

Differentiated emissions and secondary organic aerosol formation potential of organic vapor from industrial coatings in China.

Organic vapors emitted during solvent use are important precursors of secondary organic aerosols (SOAs). Industrial coatings are a major class of solvents that emit volatile and intermediate volatile organic compounds (VOCs and IVOCs, respectively). However, the emission factors and source profiles of VOCs and IVOCs from industrial coatings remain unclear. In this study, representative solvent- and water-based industrial paints were evaporated, sampled and tested using online and offline instruments. The VOC and IVOC emission factors for solvent-based paints are 129-254 and 25-80 g/kg, while for water-based paint are 13 and 32 g/kg, respectively. In solvent-based paints, the VOCs are mainly aromatics, while the IVOCs are composed of long-chain alkanes, alkenes, carbonyls and halocarbons. The VOCs and IVOCs in water-based paint are mostly oxygenates, such as ethanol, acetone, ethylene glycol, and Texanol. During the evaporation of solvent-based paints, the fraction of IVOCs increases along with those of alkenes and aldehydes, while the proportion of aromatics decreases. For water-based paint, the fraction of IVOCs slightly decreases with evaporation. The SOA formation potentials of solvent-based paints are 8.6-28.0 g/kg, much higher than that of water-based paint (0.65 g/kg); thus, substituting solvent-based paints with water-based paints may significantly decrease SOA formation.

Unpacking the factors contributing to changes in PM2.5-associated mortality in China from 2013 to 2019.

From 2013 to 2019, a series of air pollution control actions significantly reduced PM2.5 pollution in China. Control actions included changes in activity levels, structural adjustment (SA) policy, energy and material saving (EMS) policy, and end-of-pipe (EOP) control in several sources, which have not been systematically studied in previous studies. Here, we integrate an emission inventory, a chemical transport model, a health impact assessment model, and a scenario analysis to quantify the contribution of each control action across a range of major emission sources to the changes in PM2.5 concentrations and associated mortality in China from 2013 to 2019. Assuming equal toxicity of PM2.5 from all the sources, we estimate that PM2.5-related mortality decreased from 2.52 (95 % confidence interval, 2.13-2.88) to 1.94 (1.62-2.24) million deaths. Anthropogenic emission reductions and declining baseline incidence rates significantly contributed to health benefits, but population aging partially offset their impact. Among the major sources, controls on power plants and industrial boilers were responsible for the highest reduction in PM2.5-related mortality (∼80 %), followed by industrial processes (∼40 %), residential combustion (∼40 %), and transportation (∼30 %). However, considering the potentially higher relative risks of power plant PM2.5, the adverse effects avoided by their control could be ∼2.4 times the current estimation. Our power plant sensitivity analyses indicate that future estimates of source-specific PM2.5 health effects should incorporate variations in individual source PM2.5 effect coefficients when available. As for the control actions, while activity levels increased for most sources, SA policy significantly reduced the emissions in residential combustion and industrial boilers, and EOP control dominated the contribution in health benefits in most sources except residential combustion. Considering the emission reduction potential by source and control actions in 2019, our results suggest that promoting clean energy in residential combustion and enforcing more stringent EOP control in the iron and steel industry should be prioritized in the future.

The development of local ambient air quality standards: A case study of Hainan Province, China.

The ambient air quality standard (AAQS) is a vital policy instrument for protecting the environment and human health. Hainan Province is at the forefront of China's efforts to protect its ecological environment, with an official goal to achieve world-leading air quality by 2035. However, neither the national AAQS nor the World Health Organization guideline offers sufficient guidance for improving air quality in Hainan because Hainan has well met the former while the latter is excessively stringent. Consequently, the establishment of Hainan's local AAQS becomes imperative. Nonetheless, research regarding the development of local AAQS is scarce, especially in comparatively more polluted countries such as China. The relatively high background values and significant interannual fluctuations in air pollutant concentrations in Hainan present challenges in the development of local AAQS. Our research proposes a world-class local AAQS of Hainan Province by reviewing the AAQS in major countries or regions worldwide, analyzing the influence of different statistical forms, and carefully evaluating the attainability of the standard. In the proposed AAQS, the annual mean concentration limit for PM2.5, the annual 95th percentile of daily maximum 8-h mean (MDA8) concentration limit for O3, and the peak season concentration limit for O3 are set at 10, 120, and 85 µg/m3, respectively. Our study indicates that, with effective control policies, Hainan is projected to achieve compliance with the new standard by 2035. The implementation of the local AAQS is estimated to avoid 1,526 (1,253-1,789) and 259 (132-501) premature deaths attributable to long-term exposure to PM2.5 and O3 in Hainan in 2035, respectively.

Response of organic aerosol in Beijing to emission reductions during the XXIV Olympic Winter Games.

Organic aerosol (OA) serves as a crucial component of fine particulate matter. However, the response of OA to changes in anthropogenic emissions remains unclear due to its complexity. The XXIV Olympic Winter Games (OWG) provided real atmospheric experimental conditions on studying the response of OA to substantial emission reductions in winter. Here, we explored the sources and variations of OA based on the observation of aerosol mass spectrometer (AMS) combined with positive matrix factorization (PMF) analysis in urban Beijing during the 2022 Olympic Winter Games. The influences of meteorological conditions on OA concentrations were corrected by CO and verified by deweathered model. The CO-normalized primary OA (POA) concentrations from traffic, cooking, coal and biomass burning during the OWG decreased by 39.8 %, 23.2 % and 65.0 %, respectively. Measures controlling coal and biomass burning were most effective in reducing POA during the OWG. For the CO-normalized concentration of secondary OA (SOA), aqueous-phase related oxygenated OA decreased by 51.8 % due to the lower relative humidity and emission reduction in precursors, while the less oxidized­oxygenated OA even slightly increased as the enhanced atmospheric oxidation processes may partially offset the efficacy of emission control. Therefore, more targeted reduction of organic precursors shall be enhanced to lower atmospheric oxidation capacity and mitigate SOA pollution.

Chemical characteristics of long-term acid rain and its impact on lake water chemistry: A case study in Southwest China.

The chemical composition of acid rain and its impact on lake water chemistry in Chongqing, China, from 2000 to 2020 were studied in this study. The regional acid rain intensity is affected jointly by the acid gas emissions and the neutralization of alkaline substances. The pH of precipitation experienced three stages of fluctuating decline, continuous improvement, and a slight correction. Precipitation pH showed inflection points in 2010, mainly due to the total control actions of SO2 and NOx implemented in 2011. The total ion concentrations in rural areas and urban areas were 489.08 µeq/L and 618.57 µeq/L, respectively. The top four ions were SO42-, Ca2+, NH4+ and NO3-, which accounted for more than 90% of the total ion concentration, indicating the anthropogenic effects. Before 2010, SO42- fluctuated greatly while NO3- continued to rise; however, after 2010, both SO42- and NO3- began to decline rapidly, with the rates of -12.03 µeq/(L·year) and -4.11 µeq/(L·year). Because the decline rate of SO42- was 2.91 times that of NO3-, the regional acid rain has changed from sulfuric acid rain to mixed sulfuric and nitric acid rain. The lake water is weakly acidic, with an average pH of 5.86, and the acidification frequency is 30.00%. Acidification of lake water is jointly affected by acid deposition and acid neutralization capacity of lake water. Acid deposition has a profound impact on water acidification, and nitrogen (N) deposition, especially reduced N deposition, should be the focus of future research.

Modeling the Formation of Organic Compounds across Full Volatility Ranges and Their Contribution to Nanoparticle Growth in a Polluted Atmosphere.

Nanoparticle growth influences atmospheric particles' climatic effects, and it is largely driven by low-volatility organic vapors. However, the magnitude and mechanism of organics' contribution to nanoparticle growth in polluted environments remain unclear because current observations and models cannot capture organics across full volatility ranges or track their formation chemistry. Here, we develop a mechanistic model that characterizes the full volatility spectrum of organic vapors and their contributions to nanoparticle growth by coupling advanced organic oxidation modeling and kinetic gas-particle partitioning. The model is applied to Nanjing, a typical polluted city, and it effectively captures the volatility distribution of low-volatility organics (with saturation vapor concentrations <0.3 µg/m3), thus accurately reproducing growth rates (GRs), with a 4.91% normalized mean bias. Simulations indicate that as particles grow from 4 to 40 nm, the relative fractions of GRs attributable to organics increase from 59 to 86%, with the remaining contribution from H2SO4 and its clusters. Aromatics contribute much to condensable organic vapors (∼37%), especially low-volatility vapors (∼61%), thus contributing the most to GRs (32-46%) as 4-40 nm particles grow. Alkanes also contribute 19-35% of GRs, while biogenic volatile organic compounds contribute minimally (<13%). Our model helps assess the climatic impacts of particles and predict future changes.

Increased Impact of Aviation on Air Quality and Human Health in China.

China's civil aviation market has rapidly expanded, becoming the world's second-largest. However, the air quality and health impacts caused by its aircraft emissions have been inadequately assessed. Here, we leverage an updated emission inventory of air pollutants with improved temporal and spatial resolution based on hundreds of thousands of flight trajectories and simulate aviation-attributable contributions to ground-level air pollution in China. We find that in 2017, the annual-average aviation-attributed PM2.5 and O3 concentrations were 0.4-1.5 and 10.6-14.5 µg·m-3, respectively, suggesting that aviation emissions have become an increasingly important source of ambient air pollution. The contributions attributable to high-altitude emissions (climb/cruise/descent) were comparable to those at low altitudes (landing and takeoff). Aviation-attributed ambient PM2.5 and O3 exposures are estimated to have caused about 67,000 deaths in China in 2017, with populous coastal regions in Eastern China suffering the most due to the dense aviation activity. We recommend that industrial and policy stakeholders expedite an agenda of regulating air pollutants harmonized with decarbonization efforts for a more sustainable aviation future.

Identification and Parametrization of Key Factors Affecting Levoglucosan Emission During Solid Fuel Burning.

Levoglucosan (LG) is a pyrolysis product of cellulose and hemicellulose at low combustion temperatures. However, LG release cannot be determined only by considering the contents of cellulose and hemicellulose exclusively due to the complexity of combustion processes and the physical-chemical properties of the fuel. This study detected the emission factors (EFs) of LG from 22 different solid fuel samples (including coal and biomass) by considering 18 different fuel properties and five combustion parameters. The average LGEFs during solid fuel burning varied in a range of 0.03-136 mg kg-1, with a magnitude difference of 1-4 orders. While the variations in cellulose (59.5-368 mg g-1) and hemicellulose (73.5-165 mg g-1) contents of fuel samples were only one- to 6-fold. A short combustion duration (<150 min) and a medium combustion temperature (200-400 °C) influenced by volatile and ash contents are crucial for the generation and accumulation of LG. A random forest coupled with the Akaike information criterion stepwise regression model successfully explained 96% of the total LG emission variation using three variables (ash content, cellulose content, and modified combustion efficiency). The ash content promoted coke formation and LG chain cracking by increasing the pyrolysis temperature and is considered the most important factor. The alkali metal in ash can reduce the energy barrier of intramolecular ring contraction reactions and inhibit the dehydration reactions, which led to additional heat being utilized by the competitive pathways of LG formation. This study provided a method to address the parametrization and release mechanisms of combustion source emissions.

Global Anthropogenic Emissions of Full-Volatility Organic Compounds.

Traditional global emission inventories classify primary organic emissions into nonvolatile organic carbon and volatile organic compounds (VOCs), excluding intermediate-volatility and semivolatile organic compounds (IVOCs and SVOCs, respectively), which are important precursors of secondary organic aerosols. This study establishes the first global anthropogenic full-volatility organic emission inventory with chemically speciated or volatility-binned emission factors. The emissions of extremely low/low-volatility organic compounds (xLVOCs), SVOCs, IVOCs, and VOCs in 2015 were 13.2, 10.1, 23.3, and 120.5 Mt, respectively. The full-volatility framework fills a gap of 18.5 Mt I/S/xLVOCs compared with the traditional framework. Volatile chemical products (VCPs), domestic combustion, and on-road transportation sources were dominant contributors to full-volatility emissions, accounting for 30, 30, and 12%, respectively. The VCP and on-road transportation sectors were the main contributors to IVOCs and VOCs. The key emitting regions included Africa, India, Southeast Asia, China, Europe, and the United States, among which China, Europe, and the United States emitted higher proportions of IVOCs and VOCs owing to the use of cleaner fuel in domestic combustion and more intense emissions from VCPs and on-road transportation activities. The findings contribute to a better understanding of the impact of organic emissions on global air pollution and climate change.